autoclave aerated concrete machine(autoclave aerat

autoclave aerated concrete machine(autoclave aerat

Changzhou, China
Changzhou, China
Company
86-519-88831542
William Sheng
Contact person

Basic Information

Step 1.Dosing and matching raw materials. Step 2.Feeding matched raw material into pouring tank for mixing. Step 3.Pour mixed materials into mould. Step 4.Put mould into curing room for standstill hardening with temperature of 40ýý.This may take 2-3 hours. Step 5-6.When block reachs a certain hardness(0.2-0.3Mpa) it would be hoistd and turned over by tilting hoistor which preparing for cutting.Then the block would be put on a cutting car and also demoulded. Step 7-8.The cutting car transfer block through cutter for horizental cutting. Step 9.After horizental cutting the cutting car would drive the block to below vertical cutting machine for vertical cutting.The whole cutting cycle may within 6 minutes. Step 10.After cutting the block would be hoisted by a semi-finished hoister to the hardening car. Step 11-12.The hardening car would transfer block into autoclave for hardening under a pressure of 1.3 Mpa with steam for 8-10 hours. Step 13-15.The finished product leave out of autoclave and packing for delivery. Step 16-17.After packing the side plate would return back to reorganize with demoulded mould. Step 18.The mould would be clean-up and oil spraying for new cycle of pouring and cutting. Step 19.Our plant can also make slab just pur steel bar into the slurry to reinforce the strength of slab.

Delivery terms and packaging

Port: shanghai

Payment term

Telegraphic transfer

Фотографии

    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty


    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!

    Close

    1

    Дата события:

    12.10.2016 - 18.10.2016
    Catalog
    Cancel Close
      Show more close
        Area search
        Worldwide
        Категории
          Product